Denon AVR-1611 Manual Del Usuario página 48

Ocultar thumbs Ver también para AVR-1611:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
Audio Adjust
Surround Parameter
Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.
Setting items
n In the PLgx or PLg mode
Mode
Set the play modes for the
Cinema : Surround sound mode optimized for movie sources.
different surround modes.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
n In the PLgz mode
Height : Dolby PLgz Height playback mode.
n In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
• When "Surround Parameter" – "Front Height" (vpage  45) is set to
"ON", the "Height" mode is set automatically.
• The "Music" mode is also effective for movie sources including a lot of
stereo music.
Cinema EQ
ON : "Cinema EQ" is used.
Soften the treble range
OFF : "Cinema EQ" is not used.
of movie soundtracks for
better understanding.
DRC
Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range
the source. This can be set in the Dolby TrueHD mode.
(difference between loud
Low / Mid / High : These set the compression level.
and soft sounds).
OFF : Dynamic range compression is always off.
D.Comp
Low / Mid / High : These set the compression level.
Compress dynamic range
OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
LFE
–10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
Center Image
0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
44
Remote control operation
buttons
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Panorama
ON : Set.
Assign front L/R signal also
OFF : Do not set.
to surround channels for
wider sound.
Dimension
0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width
0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Delay Time
0ms – 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Lev.
1 – 15 (10)
Adjust effect signal level.
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size
Small : Simulate acoustics of a small room.
Determine size of acoustic
Medium-S : Simulate acoustics of a medium-small room.
environment.
Medium : Simulate acoustics of a medium room.
Medium-L : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
AFDM
ON : Set.
(Auto flag detect mode)
OFF : Do not set.
Detect the source's
[Example] Playing Dolby Digital software (with EX flag)
surround back channel
• When "AFDM" is set to "ON", the surround mode is automatically set
signal and set the
to the DOLBY D + PLgx C mode.
optimum surround mode
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
automatically.
"Surround Parameter" – "S.Back" to "MTRX ON".
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when "AFDM" is set to
"ON", set "Surround Parameter" – "S.Back" to "MTRX ON" or
"PLgx CINEMA".
Confirm the setting
Setting details
Return to previous menu

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido