Publicidad
Idiomas disponibles
Idiomas disponibles
How To Set The Drift Cutters
Drift cutters are used to cut a path
through snow deeper than the auger
housing.
1. Loosen the wingnuts that secure
the drift cutters
to the auger hous-
ing. See Figure 12.
2. Raise the drift cutters to the de-
sired height.
3. Tighten the wingnuts.
Wingnul
Drift Cutter
_.<
Figure 12
_" CHECKLIST
Before you operate your new snow
thrower, to ensure that you receive the
best performance and satisfaction from
this quality product, please review the
following checklist:
_' All assembly instructions
have been
completed.
_' The discharge chute rotates freely.
_'
No remaining loose parts in carton.
While learning how to use your snow
thrower, pay extra attention to the fol-
lowing important items:
_'
Engine oil is at proper level.
_'
Make sure gas tank is filled properly
with clean, fresh, unleaded gasoline.
_' Become
familiar
with all controls-
their location and function. Operate
controls before starting engine.
F-021073L
12
Publicidad
