Admiral AAV-2 Guía De Uso Y Cuidado página 7

Control features vary by model
_X7'_4 _Ii S&_
DH.tCAT_;.S
Note:
In wash water temperatures below 60° F,
detergents do not dissolve well or clean well. Care
labels define cold water as up to 85° F.
Select Options
{if desired)
Extra Rinse
When the knob is in the on position, an additional
rinse at the end of the Cottons cycle is provided to
more completely remove laundry additives, suds,
perfumes, etc.
Select Cycle
Delicates Cycle
This cycle provides up to 12 minutes of agitation.
Depending on the load, select either the Slow/Slow or
Slow/Normal wash/spin speed.
Soak Cycle
This cycle provides approximately 30 minutes of
agitation and soaking to help remove stubborn dirt
and stains. For more information see page 7.
Pull Control Dial Out to Start
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise) until the pointer is at
the number of minutes desired for the wash load.
IMPORTANT: For optimum fabric care, the
appropriate wash and spin speed for the load type
must be selected using the Wash/Spin Speed knob.
Cottons Cycle
For regular fabrics, select the cycle time and turn the
Wash/Spin Speed dial to Normal/Normal.
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
I Note:
Do not attempt to turn the control dial counterclockwise. Damage to the timer will result.
For fabrics needing a slower spin speed to reduce
wrinkling, set the control dial on Wrinkle-Free and turn
the wash/spin speed dial to Normal/Slow.
6