(see the image on page 2)
1 – Filler cap
2 – Lid
3 – Glass container
4 – Blades
5 – Container support
6 - Motor body
7 - On/off button
8 – Pulse button
9 – Function knob
10 – Smoothie function
11 – Soup (sauce) function
12 – Ice crusher function
Technical data: see the label on the appliance.
Contact with food
Only these parts are intended for contact with food, under the conditions indicated:
Parts intended for
contact with food
Filler cap (1)
Lid (2)
Glass container (3)
Blades (4)
- These parts can only be used with this appliance. Do not use the parts separately for other applications.
- Before using the appliance for the first time wash the parts intended for contact with food as
indicated in the Maintenance section.
USING THE APPLIANCE
1. Assembling the glass container
- Switch off the appliance and unplug it from the socket before assembling or removing accessories.
- Insert the blades (4) on the container support (5). PERFORM THIS OPERATION CAREFULLY, THE
BLADES ARE SHARP.
- Screw the container support (5) clockwise onto the glass container (3).
2. Positioning the glass container (3) on the motor body (6)
- Position the glass container (3) on the motor body (6) and push it down until it is in place.
3. Inserting food
- Insert the food into the glass container.
ATTENTION: do not overfill the container.
- Place the lid (2) firmly on the glass container (3). Insert the filler cap (1) firmly on the lid (2).
- Make sure that the knob (9) is in position "0" and insert the plug into the socket.
4. Operating mode selection
Function knob (9)
When the knob (9) is in the "0" position, the appliance is off.
Turn the knob (9) clockwise to select the motor speed between MIN and MAX (MIN: minimum speed,
MAX: maximum speed).
Alternatively, turn the knob (9) counter-clockwise to select an automatic program.
(EN) TECHNICAL INFORMATION
(EN) INSTRUCTIONS FOR USE
Types of food
All
11 / 32
Maximum
temperature
40°C
Maximum time of
contact
5min