Orbegozo MP 1550 Manual De Instrucciones página 18

MP 1550
- Put the screw ring in place until tight. Do not over tighten (fig. 13).
- Make the cover with the cylindrical nozzle (fig. 14)
- Shape the Kibbe as illustrated below and fry them.
CLEANING AND MAINTENANCE
Disassembling
Make sure that the motor has
•
Disconnect the plug from the
•
Disassemble by reversing the
•
If the fixing ring is not easily
•
tools（fig 9）.
To remove the cutting plate
•
between the cutting plate and
up (fig.10).
Press the unlock button before
•
head, rotate it in the same
can be removed easily.
Cleaning
Do not wash the main body in running water or immerse the motor housing into water, just clean it
•
with a wet cloth.
Clean other attachments with normal neutral liquid. Put little esculent grease on the blade and
•
butting discs to keep them smooth.
Cleaning the meat grinder after every use is compulsory.
•
Always unplug from the socket before cleaning.
•
Do not wash with bleacher, thinner, petrol or other acidity or alkaline liquid. This may make the
•
attachment change colour or rust.
Dry the plate, grinder head, nut and other aluminium parts in order to avoid any colour change.
•
Wipe all the cutting parts with a cloth dipped in veg-oil.
•
stopped completely.
power outlet.
steps from 6-1 pictures.
removed by hands, please use
easily, place a
the head as illustrated and lift it
removing the head. Holding the
direction as fig.11. Then the head
screwdriver
17