Overmax Camspot 4.9 Manual De Usuario página 16

4. Add device manually (see fig. 5)
The product supports Wi-Fi 2.4 GHz network only, it does not support Wi-Fi 5
GHz. Before you configure Wi-Fi, set router parameters. Wi-Fi password must
EN
not include special characters.
Make sure the router and camera are close to each other to allow fast
•
configuration of the device.
Connect the mobile device to local Wi-Fi network which the camera will
•
be connected to, next click „My home". Click the field called „Add device"
and „Add manually", and then select and click „Camspot 4.9".
Moving on, enter the correct name of the network and Wi-Fi password.
•
5. Scan camera with QR code (see fig. 6)
Reset the camera by clicking „Reset" (6, fig. 1) to restore factory settings.
•
Select next step and move on.
To pair the camera, scan QR code from the mobile screen through the
•
camera lens, keep it at a distance of 15-20 cm. Try not to shake the mobile
phone when scanning.
When you can hear a „sound", click „I heard a sound". Wait until the device
•
completes configuration.
After adding the device, click „finish" to finish adding the device.
•