Dynex DX-PDVD9 Guia Del Usuario página 12

12
Connecting to TV and amplifier
To connect to a TV and amplifier:
• Connect black mini-plug to the AV OUT jack on the DVD player.
• Connect the yellow plug to the VIDEO IN jack on the TV.
• Connect the red plug to the AUDIO IN R jack on the amplifier.
• Connect white plug to the AUDIO IN L jack on the amplifier.
Using the setup menu
To access the setup menu:
1 With no disc in the player, press SETUP on the remote control or MENU on the player.
The General Setup Page of the setup menu opens and the General Setup icon
highlighted.
2 Press ENTER. TV Display is highlighted.
3 Press
4 Press
5 Press
6 Press
7 Repeat Steps 3 to 5 to set the other menu options.
Changing setup options
Normal/PS—Select this option when the player is connected to a normal TV. Wide-screen
images are shown on the screen, but with some parts cropped automatically.
or to select a sub-menu on the General Setup Page.
to open the selected sub-menu.
or to select an option, then press ENTER to confirm your selection.
to return to the previous menu.
Advanced setup
is