LD Systems DIO 22 Manual De Usuario página 7

PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
The package of LDDIO22 includes:
• 1 x DIO 22 Dante Break Out Box
• 1 set of terminal blocks
• 1 x mounting set for on-table or under-table installation
• 1 set of rubber feet (pre-assembled)
• User manual
The package of LDDIO44 includes:
• 1 x DIO 44 Dante Break Out Box
• 1 set of terminal blocks
• 1 x mounting set for on-table or under-table installation
• 1 set of rubber feet (pre-assembled)
• User manual
INTRODUCTION
DIO22
Part of the TICA®series, the DIO 22 is a two input and output Dante interface that delivers the
capabilities that audio and AV professionals really need. Equipped with two balanced mic/line
inputs and line outputs with four-step gain settings and 24V phantom power on each input.
Signal presence lights on each channel speed installation and fault-finding.
The DIO 22 is easy to configure from the front panel and can then be locked to prevent tampering.
Power from any PoE+ network switch or use the optional, external power supply. Since it comes
with two Dante networked ports, you can daisy chain devices together. It also works as a PoE+
injector: if you use the external power supply, you can power one further networked device in
the chain.
Its tiny form factor (106 x 44 x 222 mm) and included mounting plates allow it to be installed
discreetly behind screens or under tables. Alternatively, it fits into 1/3 19 inch rack. Use the optional
rack tray to slot up to three TICA® Series products alongside each other and build a system to
your exact requirements, using minimal rack space.
Terminal block connections on the analogue inputs and outputs make wiring easy.
The perfect solution for professional installers wanting to interface into Dante equipment.
Dante Domain Manager and AES 67 compliant.
7