Eiko 7WP1 Serie Instrucciones De Instalación

O R D E R C O D E I T E M #
13664 TWP1-PS120-40-H
13663 TWP1-PS120-40-U
13665 TWP1-PS120-50-U
13668 TWP1-PS120-FCCT-H
13666 TWP1-PS120-FCCT-U
13667 TWP1-PS120-FCCT-V
13652 TWP1-PS45-40-H
13651 TWP1-PS45-40-U
13653 TWP1-PS45-50-U
13656 TWP1-PS45-FCCT-H
13654 TWP1-PS45-FCCT-U
13655 TWP1-PS45-FCCT-V
13658 TWP1-PS80-40-H
13657 TWP1-PS80-40-U
13659 TWP1-PS80-50-U
13662 TWP1-PS80-FCCT-H
13660 TWP1-PS80-FCCT-U
13661 TWP1-PS80-FCCT-V
OVERVIEW
WHAT'S IN THE BOX
• TWP1 fixture
IMPORTANT
Before installing fixture, read all instructions and retain for future reference. The important instructions and safeguards that appear in this document are not inclusive of all
possible conditions and situations that may occur. It must be understood that common sense, caution, and care are factors that cannot be built into a product. These factors
must be supplied by those that care for and operate the fixture.
For additional information not covered in this document please contact a local representative.
WARNING AND SAFETY
• Risk of electric shock!
• Ensure power is OFF at the electrical panel before starting installation or maintenance
• Verify site supply voltage matches luminaire product label
• Ensure the cover is closed during operation
• Modifications to the product will void warranty
• Ambient temperature range under normal operation not to exceed -40°F to 104°F (-40°C to 40°C)
• Wiring to fixture must be in accordance with the National Electrical Code and all applicable local electrical and safety regulations
A. JUNCTION BOX INSTALLATION
1
Turn off Power.
ON l k
OFF
l c c
5
Use a screwdriver to re- Lock the bottom shell on the
move the plug. Attach mounting seat with screws.
the EV A cotton pad to Connect the L,N and G wires
bottom shell. to power supply.
1
INSTALLATION INSTRUCTIONS
TWP1 Series - Traditional Wall Pack
W A T T S
120/105/90W
120/105/90W
120/105/90W
120/105/90W
120/105/90W
120/105/90W
45/35/25W
45/35/25W
45/35/25W
45/35/25W
45/35/25W
45/35/25W
80/70/60W
80/70/60W
80/70/60W
80/70/60W
80/70/60W
80/70/60W
WHAT YOU'LL NEED
• Wiring supplies as per national and local electrical codes
• #2 Phillips screwdriver
• Safety glasses
2
Use a screwdriver to re-
move the screws on both
sides.
.
6
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
Head Office, Canada: 7900 Goreway Drive, Unit 8, Brampton, ON L6T 5W6 1.888.741.2675
C C T
4000K
4000K
5000K
30/40/5000K
30/40/5000K
30/40/5000K
4000K
4000K
5000K
30/40/5000K
30/40/5000K
30/40/5000K
4000K
4000K
5000K
30/40/5000K
30/40/5000K
30/40/5000K
3
Open the fixture, and remove the
upper cover of the fixture.
7
Mount the cover of the fixture.
Street, 3
th
4
Drill mounting holes with an
electric drill.
8
Fix the fixture with screws. Make sure the installation is
complete before turning on the
power switch.
Floor, Olathe, KS 66061 1.800.852.2217
rd
9
ON
l k
OFF
l c c
eiko.com
Rev. 04/19/23