Card With System Code Error; Credit Exceeds The Maximum Allowed; Administrator Menu - Favero Electronics CARDWRITER-01 Manual De Uso

ENGLISH
Operator totalizers
Allocated credit: 150.00€
Cancelled credit: 20.00€
► Zero totalizers
 / +  / -
Fig. 10
To zero the two operator totalizers you should
select, via the two keys [ / ] and [ / ], the
heading "Zero totalizers", and then press [ /
When the confirmation screen appears, press [ /
] again. Then press [ /
OK
The administrator totalizers will not be modified by
this operation (see ch. 7.1).

6.5 Card with system code error

If a card with a system code error is placed on the
programmer, an error message will appear (Fig.
11).
Warning!
System Code not
recognised!
 / +
 / -
Fig. 11
This may occur when:
• the client has confused two different system
cards (in this case it is better to return the card
without conducting further operations);
• the administrator has decided to modify the
system code of the entire system and all cards
are being updated (in this case the system code
of the card should be updated with the new
value).
The operator menu allows for the sole operation of
updating the card's system code to the current
value in the programmer's memory (ch. 7.3). This
operation does not modify the current credit of the
card.
00193-M01-01-ML - Manuale uso
 
BACK OK
] to exit.
BACK
 
BACK OK
After having chosen the heading "Update the
System Code" a confirmation screen will appear
(Fig. 12).
Update System Code
Update System Code?
 / +
].
OK
Fig. 12
Press [ /
OK
] to cancel. If the operation is completed
BACK
successfully, a confirmation screen will appear,
otherwise an error message will occur.

6.6 Credit exceeds the maximum allowed

If a card whose credit exceeds the maximum
amount allowed is placed on the programmer (ch.
7.2), an error message will appear (Fig. 13).
exceeds the maximum
credit allowed!
 / +
Fig. 13
In the operator menu, increase of credit operations
will not be permitted.
The maximum credit allowed helps you to limit the
current card
protection against loss or theft (ch. 7.2).
7 A
DMINISTRATOR MENU
To enter or exit the menu, remove all cards from the
reader area and press [ /
You will be asked to enter your password (Fig. 14).
Pag. 6 / 36
OK to confirm
BACK to cancel

 / -
BACK
] to update the system code, or [ /
Warning!
Current credit

 / -
BACK
credit, ensuring
] for 2 seconds.
BACK
F

OK

OK
greater client
E D
AVERO LECTRONIC ESIGN