Philips CDI 220 Manual Del Propietário página 7

5. AUDIO CONNECTIONS
- If you use the TV antenna input (23), the TV will play sound
along with the picture.
• If you use the Y/C (S-video) (20) or video (CVBS) (19) input,
you will also need to connect the player's audio output
(17, 18) to the TV's audio input.
6. DIGITAL OUT CONNECTION
Only for audio discs.
This output supplies a digital signal and can therefore only be
connected to an input which is suitable for this signal.
Never connect this socket to a non-digital input of an amplifier,
such as AUX, CD, TAPE, PHONO, etc.!
INSTALLATION
• For Hill sound, you can connect the player's audio output
(17, 18) to the input of your HiFi system, provided that the
player, TV and HiFi system are placed close to each other.
CAUTION
DO NOT CONNECT THE PLAYER'S AUDIO OurPUT (17, 18)
TO THE HIFI PHONO (RECORD PLAYER) INPUT.
NOTE
- Please refer to the instructions that came with the TV-set for
the selection of the channel or the input used.
- 11 -