Simplicity Scout Manual Del Propietário página 13

MAINTENANCE
Pre-Motor Filter Replacement
IMPORTANT! Ensure the cleaner is
disconnected from the power supply
before performing any maintenance
procedures.
The pre-motor filter should be replaced
every six months or when it becomes
visibly dirty. Always operate the cleaner
with clean filters; otherwise, there may
be a reduction in the suction power or
motor damage may result.
Note: Do not use a washing machine to
wash the filter or a hair drier to dry the
filter.
• Pull out the filter bracket assembly.
• Replace with a new filter.
(Fig 13)
(Fig 13)
11