Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Measurements taken in ear and forehead mode are
automatically stored in the appliance. The measured
values are available again along with information on the
date, time and measurement mode when the "MEM / SET"
button
is operated in standard mode. Press the "MEM /
1
SET" button
once to retrieve the value of the last
1
measurement. The "Memory" symbol (memory mode), the
number of the measurement, date, time and measurement
mode will appear in the LC display
the "MEM / SET" button
with its associated measured value will appear. A maximum
of 9 measurements can be stored.
In order to return to standard mode, proceed as follows:
1. Press the "FOREHEAD" button
button
repeatedly at the same time until the LC
3
display
again shows the room temperature, date
5
and time, as well as the
2. You are now in standard mode again.
Changing the battery
The appliance is fi tted with a lithium battery (CR2032,
3 V
) that allows a lot of measurements to be taken. If
the battery is empty, you will be made aware of that by
means of an appropriate error message (see "Functions /
error analysis - problem-solving").
Functions / error analysis
(Fig. G). By pressing
5
the next storage space along
1
and the "EAR"
4
symbol (Illustration D).
GB/MT
117
Publicidad
