Publicidad
Idiomas disponibles
Idiomas disponibles
components.
15. Do not move the product during use.
16. If you smell gas, turn off the stove immediately and close the valve on the
gas bottle. Contact an authorized service center to solve the problem.
17. Use only approved LPG gas cylinders.
18. After use, close the gas valve on the bottle.
19. Replace the gas cylinder away from possible sources of ignition or sparks.
20. The gas pipe must not exceed 1.5m in length.
21. Check that the gas pipe is not kinked and is not in contact with surfaces
that become hot.
22. Check the expiration date of the gas pipe.
23. Use a pressure regulator according to EN 16129. Always use a low
pressure regulator to connect the stove to the cylinder. The regulator for l3 +
(28-30 / 37) must have a fixed calibration at 37mbar for propane and 30mbar
for butane. For I3B / P (30), the regulator must be calibrated at 30mbar.
24. Store the stove in a dry place, away from atmospheric agents or factors
that could damage it.
25. Any repairs must be carried out by qualified personnel in a service center
authorized by the manufacturer or importer.
26. Avoid blocking the Venturi nozzle of the burners. Check that they are not
blocked.
27. The diameter of the usable pans is between 120 and 200mm.
28. Parts sealed by the manufacturer must not be altered by the user.
29. Any modification to the stove can be dangerous.
30. Warning: do not use flames to check for gas leaks!
INSTALLATION:
Place the stove flat, as indicated above.
Check that the gas pipe to be used is approved and is connected to a pressure
reducer with the characteristics described above.
Use a metal clamp for LPG for the gas pipe.
Insert the hose on the fitting (on the back of the stove) for at least 2 cm.
Tighten the metal clamp around the pipe to prevent gas leaks .
ASSEMBLING THE CYLINDER:
Before connecting the cylinder, close all the taps on the stove.
Place the cylinder in a stable and dry place.
8
Publicidad
