3. Connect the filter to the power supply
Maintain the filter
1. To make the best use of the filter and maéintain its function and efficiency , please clean the
filter and it's accessories at least once every 2 weeks
2. If the filter cartridge is blocked, it should be cleaned or replaced immediately , or the filtering
efficiency will become extremely low
3. Clean the filter :
-disconnect from the power supply
-take off the filter from the tank , open filter cartridge , and pour out the dirty water in
the filter
-wash the filtration chamber and filter cartridge with running water
4. Wash Rotor Assembly and water chamber thoroughly every 3 months as the following
instructions :
-take out the fixing bracket
-move the pump from the bracket
-take off the impellor cover and take out the rotor assembly
-wash all components of the filter thoroughly with running water , assemble all the
parts back as show in picture 1
REMINDER
Make sure the power supply cord is inserted into the power supply cord slot.
Important Safety Instructions
1. Please operate the appliance under the rated voltage and use a separate receptacle that is
well grounded
2. Add water regularly to keep the water surface above the minimum water level of the filter
3. Stop using the filter if it has a damaged or aged cord oe plug. If it is malfunctioning or shows
abnormal sign in any manner , and contact your local retailer
4. Before installing , cleaning and maintaining the filter , please disconnect the filter from the
power supply to avoid electric shock
5. don't run dry
2