Topex 31C800 Instrucciones De Uso página 6

GB
ROAD MEASURING WHEEL
31C800
INSTRUCTIONS FOR USE
– Protect the device against water and humidity.
– When measuring in straight line, try to drive the
wheel straight. This will ensure lower error of the
measurement result.
– Do not use underwater.
– Do not expose to high temperature.
– As soon as the battery symbol appears on the display,
immediately replace the batteries with new ones.
– Remove the batteries when not using the device for
a long time.
– Never use water or other chemical liquids for
cleaning.
– Wipe the tool with a dry cloth only.
– Always store in a dry place.
INTENDED USE
Road measuring wheel is designed for measuring
distance between two measurement points. To make a
measurement, roll the wheel on an even ground, rotation
of the wheel activates electronic counter. Measurement
result is digitally presented on the LCD display.
TOOL PARTS
1. Handle
2. LCD display
3. Handle length adjustment lock
4. Battery compartment
5. Measuring wheel
6. Stand
7. CLR button
8. SM button
9. ON/OFF switch
10. RM button
11. Metre/imperial units toggle
12. Empty battery indicator
13. Memory bank indicator
14. Indicator for data readout from memory bank
15. Metric units indicator
16. Imperial units indicator
17. Digital value indicator
6
OPERATION AND USE
– Press the ON/OFF switch (9) to switch on the tool (fig. B).
– Choose the measurement units with the switch (11)
(fig. B), it will be indicated on the display with symbol
(15) or (16), respectively for the chosen units (fig. C).
– Press the CLR button (7) to clear value shown on the
indicator (fig. B).
– Roll the measuring wheel (5) (fig. A) on the ground to
make a measurement.
– Press the SM button (8) to store the result in memory
bank.
– Press the RM button (10) to read the memory bank
M1. Press the RM button twice to read value stored
in memory bank M2, press it three times to read M3,
etc. Reading data from memory bank is indicated on
the display with R symbol (14). After few seconds of
inactivity the display returns to current value.
– Clear current value with CLR button (7) before next
measurement.
TECHNICAL PARAMETERS
Measurement range
Accuracy
Measurement resolution
Power supply
Working temperature range
ENVIRONMENT
Do not dispose of electrically powered
products with household wastes, they
should be utilized in proper plants.
Obtain information on wastes utilization
from your seller or local authorities.
Used up electric and electronic equipment contains
substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment
and human health.
Grupa Topex Sp. z o.o. Sp. k.
ul. Pograniczna 2/4, 02-285 Warszawa
10 000 metres
32800 ft
± 0.5%
0.1 metre
Two AAA batteries
-10°C ÷ +45°C
TOPEX.PL