Publicidad
Idiomas disponibles
Idiomas disponibles
/
@
®
®
®
Engine Controls
Figure 3
SNOWTHROWER
CONTROLS (Continued)
G. Clean=Out Tool -- Used to remove snow and debris from the
discharge chute and the auger housing.
H. Skid Shoe -- Used to adjust the ground clearance of the auger
housing.
I. Headlight
-- Used to operate the snowthrower in poor bighting
conditions.
ENGINE CONTROLS
A. Choke Control Knob -- Used to start a cold engine (see
Figure 3).
B. Electric
Start Button -- Used to start the engine using the
electric starter.
C. Primer Button -- Used to inject fuel directly into the carburetor
manifold to ensure fast starts in cool weather.
D. Safety Key -- Must be inserted to start engine. Pull out to stop.
Do not turn safety key.
E. Starter Cord Handle -- Used to start the engine manually.
F. ON/OFF Switch -- Used to start and stop the engine.
G. Fuel Tank and Cap -- Fill the fuel tank to approximately
1-1/2 in. (38 mm) below the top of the neck to allow for fuel
expansion.
H. Oil Fitl Cap (Extended
Dipstick)
(_
11
Publicidad
