Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
2. Apply adhesive (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Wipe away any excess adhesive with a soft
cloth, and wait approximately 24 hours for it
to dry.
Assembly is now complete. Install desired
faucet and drain assemblies (neither
included) per the manufacturers' instructions
to complete the installation.
3. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in or out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
3
a
a
4
2
C
b
c
B
A
c
Publicidad
