Netum C750 Manual De Instrucciones página 15

FAQ
1. Some barcodes cannot be read, why ?
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that setting for some barcode types not commonly used is off by
default. You need to activate a speci�ic barcode type to get it to work. Please contact us for
help or you may go to our of�icial website "www.netum.com" to download the complete
manual and then refer to the section of "Symbologies".
2. How to change terminator to TAB ?
Please refer to the section of "Terminator con�iguration" from the manual
downloaded from our of�icial website.
3. Are there any barcodes for applying or removing pre�ix & suf�ix ?
Yes, you may go to our of�icial website "www.netum.com" to download the manual ,refer to
the section of" pre�ix and suf�ix" or turn to customer service for help.
4. How to solve the messy code problem encountered while using other foreign languages?
The default language is English. Please refer to "Keyboard Language" to change the
language.
5. Why scanner can not read Italy Pharmacy code?
Download the manual from our of�icial website according to the scanner's model number,
refer to the section of Code32 then scan "Enable Code32" to enable the scanner to read
Italy pharmacy code.
6. Why scanner can not read add-on 2 or 5 codes?
Download the manual from our of�icial website according to the scanner's model nubmer,
refer to the section of ADD-On code and scan the appropriate command barcode to enable
the scanner read it.
7. Why scanner can not read datamatrix GS1 in a correct format ?
Scan "Enable Funtion Key Mapping" from this manual will enable scanner to output group
separator.
(12)