Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND ASSEMBLY INSTRUCTIONS
The hood must be combined with linear hobs (induction or glass-ceramic), the hood and cooking hob must match
perfectly. Combined operation with gas hobs is not permissible and explicitly prohibited.
Once the installation is complete, the electrical components (cables, connectors, motor and control box) will no lon-
ger be accessible to the user. To allow access to those parts place a removable panel secured with screws.
The downdraft can be used for both filtering and suction. When the filtering function is operating, with air recycle,
carbon filters must be used. When the downdraft is used in the filtering function, there must be a suitable section for
spillage of the air suction on the base of the kitchen.
When the suction function is operating, exhausting the filtered air on the outside, a suitable compensation system
must be used according to current standards in force. The diameter of the fume exhaust pipe must be the same or
greater than the diameter of the downdraft pipe union.
There must be sufficient ventilation in the room where the downdraft is installed, to allow the simultaneous use of
other appliances that use gas or other fuels.
EN -2
Batten dimension with wire
Installation and joint width 2 mm
Rebate depth: 6 mm
Rebate width: 6 mm and 9 mm
Publicidad
