Publicidad
Idiomas disponibles
Idiomas disponibles
Operator's Manual
WARNING
Voltage Selection
Power
requirements
for electrical equipment
differ
from area to area.
Please
ensure
that your
machine
meets the power
requirements in your area.
lf in doubt, consult a qualified electrician.
120V, 60 Hz for USA and Canada
220V, 50 Hz for Europe except UK
240V, 50 Hz for UK and Australia
110V/120V/220—240V,
50/60 Hz internally switch-
able for other countries.
DO NOT ATTEMPT THIS CONVERSION
YOURSELF.
Voltage
conversion
(Models
for Canada,
USA,
Eu-
rope,
UK and Australia are not equipped with this
facility). Each
machine
is preset at the factory ac-
cording to destination, but some machines can be set
to
110V, 120V or 220—240V as required. If your ma-
chine's voltage can be converted, refer the following
voltage conversion to a qualified Service Repair Shop
or professional service personnel.
1. Disconnect power cord.
2. Loosen holding screws and remove top panel.
3. The voltage convertor
is near the Power Switch
P.C. Board.
4. Disconnect the existing wire and connect the re-
quired wire to the proper terminal.
Terminal
P, —110V
P, — 120V
P3 — 220—240V
Wire (Blue)
POWER
Switch
P.C. Board
Voltage Conversion
Terminal Block
Publicidad
