Hydor KORALIA NANO Manual De Uso página 10

MAINTENANCE
Attention: Before any kind of intervention, ALWAYS disconnect electrical supply of
the pump and any other appliance placed in the water.
• Regular cleaning and maintenance will guarantee the pump better and longer
performance.
• With one hand hold the pump assembly, with other hand remove the external
magnet to release (use the appendix on the outside of the suction cup to help you in
this operation).
• Disassemble as shown (5).
• Clean the impeller assembly removing deposits with a soft brush. Do not use
detergents or solvents.
• Reassemble everything in reverse order, make sure the notches on the pump
chambers correspond and that the shaft is placed correctly.
• In case of abnormal noise and /or reduced performance caused by sudden changes
in electricity supply, it is sufficient to restart the pump.
INSTALLATION
In order to prevent noise and disturbance caused by vibration we suggest to position
the pump avoiding lateral contact with the aquarium glass or in an upward position
on the bottom.
• Unwind the electric cable.
• Insert the cylinder on the sphere attachment to the pump in the proper slot (2).
• If necessary apply the cable protector (G) (ideal use is tanks with urchins, triggers,
puffers and/or parrot fish) as shown (3), protecting the submerged part of the cable.
If the cable protector is too short, you can apply more then 1.
• Immerse the pump completely and turn it in a vertical position in order to allow any
air to come out of the impeller chamber.
• Attach the pump with the internal part of the suction cup + magnet support to the
aquarium side as desired (4) remember to clean the surface before attaching the
support).
• Direct the water flow as desired.
• Connect to electrical supply.
GUARANTEE
This product, all its parts and accessories are covered by warranty within the limits
provided for in this paragraph and the legal regulations currently in force. The
guarantee only covers manufacturing defects and includes the repair or replacement
of the product free of charge. The guarantee does not cover damage and/or defects
caused by carelessness, wear, unsuitable usage not complying with the instructions
and warnings in this manual, accidents, tampering, incorrect use, bad repair work or
purchases not accompanied by a fiscal receipt.
10 English