Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
BEFORE OPERATION
Inserting batteries
Detach the battery cover on the rear of the remote control
and insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational
distance of the remote control
should be approximately
5 meters (16 feet).
When this
distance decreases,
replace the batteries with new ones.
Using the remote control
The instructions
in this manual refer mainly to the buttons on
the main unit. Buttons on the remote control with the same
names as those on the main unit can be used as well.
To use the FUNCTION
button
The FUNCTION button substitutes
for the FUNCTION
buttons (CD, AUX, TUNER/BAND,
TAPE) on the main unit.
Each time FUNCTION is pressed while power is on, the next
function is selected cyclically.
If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the unit
is exposed to intense light, such as direct sunlight
- Other remote controls are used nearby (television,
etc.)
POWER
FUNCTION
PHONES
To turn the power on
Pi'eSs one of the FUNCTION buttons (CD, AUX, TUNER/
BAND, TAPE).
Play of the inserted disc or the previously
tuned station is received (Direct Play Function).
POWER is also available.
After use
Press POWER to turn off the power.
The display changes to
the clock.
When using on the batteries, you cannot turn the power on
with the remote control.
Using the headphones
C[mnect headphones
to the PHONES jack with a stereo mini
riua (03.5 mm,
'/8
inch).
N~<ound
is output from the speakers while the headphones
are plugged in.
E
ENGLISH
5
Publicidad
