Safety instructions
READ THESE INSTRUCTIONS CAREFULLY
BEFORE USING THIS APPLIANCE AND
If the appliance is sold or given away, make
sure that the instructions for use are
included with it.
Before initial use
- Before plugging the appliance into
the mains for the first time, allow
two hours for it to settle if it has been
transported in the upright position,
or 24 hours if it has been transported
horizontally; this is to allow the
refrigerant gas to flow back into the
compressor. Failure to do so could
damage the compressor.
Intended use
- This appliance is intended for domestic
use only.
- It is not designed for use in:
ERMVE180-80hin1_8010560
SAVE THEM TO REFER
TO THEM LATER ON.
14