NeuLog NUL-227 Guia Del Usuario página 20

20
Home
Note: You can also determine each axis by using an
easy method: First, click on the "Module setup" button
located in the acceleration sensor module box in the
NeuLog application and select the axis you wish to
determine. Then change the physical orientation of the
2
acceleration sensor until the readout is roughly ±9.8m/s .
2
When the sensor reads roughly ±9.8m/s , draw an
imaginary line through the sensor towards the ground,
either end of the imaginary line (sky and ground) will be
the poles of the axis in relation to the sensor you are
trying to determine.
V2018.01 English