NeuLog NUL-227 Guia Del Usuario página 21

To view all axes simultaneously
After collecting data:
1. Open the NeuLog application and connect the
acceleration sensor using one of the guides.
2. Once the sensor has been detected, click on the "Off
line Experiment" icon.
3. Click on the acceleration sensor "Module setup"
button located in the acceleration sensor module
box on the left side of the screen.
4. Click on the "Range" button and select an axis (X, Y,
or Z).
5. Click the "Load Experiment" icon located on the top
of the screen.
6. Click on the experiment you would like to upload so
that the button turns green; the default is "Newest"
(selects the most recent data collection).
7. Click again the "Load Experiment" icon to load the
data from your chosen axis onto the graph.
8. Repeat from step 3 to load the other axes on the
same graph.
V2018.01
21
Home
English