Box Content; Put On And Remove The Transport Handle; Starting The Device - Radiola GMRAVP100 Manual De Instrucciones

Box content

Put on and remove the transport handle.

Pass the transport handle through the rounds positioned on both
sides of the projector.

Starting the device

Step 1: Connect the device to the
mains socket. The device is then
powered on and the red LED is on. This
means that the projector is powered
and in a state of charge.
Step 2: Press the button located
behind the projector.
Step 3: The video projector turns on,
the LED turns green and the screen
appears after a few seconds.
_ _
19
EN