Uebler F14 Instrucciones De Montaje Y De Uso página 15

1
7. Lock the bicycle rack (1) with the key (5) and remove the key (5).
8. Connect the plug (12) to the vehicle and turn it clockwise to lock it.
7
I
9. Open the quick-release clamp (7) (arrow I), place the rack
frame (6) upright (arrow II) and close the quick-release
clamp (7) (arrow III).
12
5
II
7
III
M+P-25A-0231
Attention
Do not open the wheel rails (8) with the tail lights (9),
as this may cause damage.
10. Open the wheel rails (8) in the direction of the arrow.
11. Check that the tail lights (9) are working.
6
13
12. Push the number plate (23) diagonally up behind the number
plate holder (13). Press down the holder (22) and push
the number plate (23) behind it.
Release the holder (22) to clamp the number plate (23) in place.
13. Check that the number plate (23) is firmly fitted.
Note
To put in larger number plates, press back the stopper (24)
and push the number plate all the way into the number plate
M+P-25A-0232
holder (13).
Note
The registration number on the bicycle rack must match
the vehicle's registration number and must be clearly legible.
- 13 -
8
9
24
23
8
9
M+P-25A-0233
22
M+P-25A-0234