Gibertini CRYSTAL 1000 Manual De Instrucciones página 24

ENGLISH
4. INSTALLATION
Instructions to remove the locking device of the
balance
Unpack the balance and all its accessories.
♦
Unscrew the knob on the locking bracket as
♦
indicated by the arrow (anti clockwIse).
Retain the locking bracket in case the balance
♦
has to be returned to the supplier. This bracket
can be refastened to the balance by reolacing
the knob.
Level the balance using the spirit level on the rear and rotating the levelling feet under the front part of the
basement (Fig 3).
Insert the pan.
Insert the power supply cable in the plug located on the rear panel (Fig 2).
Insert the power supply in the main line plug checking the supply voltage printed on the power supply case
(100 / 240 Vac ) - (Fig 2).
Serial Output
Spirit level
Power supply
connector
Page 18 of 42
FIG. 2 - Rear panel details
INSTRUCTION MANUAL - 60.50.638 3
FIG. 1
nd
edition – December 2014
CRYSTAL 1000
locking
bracket