Power Button Function; Standby Mode; Auto Power Off; Auto Standby - Burris BTC35 v2 Manual De Usuario

Power Button Function

POWER OFF
To fully power off the BTC, hold
the Power button down until you
see the power off progress bar is complete and the unit is
powered off.
To cancel the shutdown process, simply release the Power
button before the progress bar is full. This operation will
manually trigger Stand-by mode.
STAND-BY MODE
To place the BTC into Stand-
by mode, press and hold the Power button, then release
it before the power off progress bar completes. Stand-by
mode deactivates the display and places the processor into
a lower power consumption state. The BTC can be quickly
turned back on with the press of the Power button. While in
Stand-by, the unit stays connected to the app via Wi-Fi.

AUTO POWER OFF

The BTC includes an auto shutdown function if no activity
has been detected. Inactivity duration can be changed in
the power settings (see page 20). Pressing any button will
restart the inactivity duration timer.
AUTO STAND-BY
The BTC includes an auto Stand-by function if no activity
has been detected. Inactivity duration can be changed in
the power settings (see page 20). Pressing any button will
restart the inactivity duration timer.
NOTE: Quick press the Power button to the hide menu
screen
11 | BURRIS THERMAL RIFLESCOPE USER MANUAL