Burris BTC35 v2 Manual De Usuario página 24

Screen Adjustment
The BTC35 v2 display is factory aligned to the device's
central axis. After installation, the Clip-on display must be
aligned to the optical axis of the daylight scope to ensure
alignment of the Point of Aim (POA) to the projectile's Point
of Impact (POI). On the BTC, this alignment is achieved
digitally using the SCREEN ADJUSTMENT tool in the MAIN
MENU.
Follow the step-by-step instructions below to zero
your BTC.
1. Ensure that the daylight optic is zeroed at an
appropriate distance.
2. Install the BTC onto the rifle system using either the
Burris Clip-on Mount (626607) or a SmartClip Adapter
system.
3. Open the MAIN MENU by pressing the Menu button
inwards.
24 | BURRIS THERMAL RIFLESCOPE USER MANUAL
SCREEN ADJUSTMENT SCREEN ADJUSTMENT
PRESS "M" TO ENTER PRESS "M" TO ENTER