Publicidad
EN
GAME:PAD S PRO WIRELESS™ for Nintendo Switch™
PRODUCT INFORMATION
Thank you for choosing snakebyte's GAME:PAD S PRO WIRELESS™. Please read this guide for important safety and health information and
retain it for future reference.
OPERATING INSTRUCTION GAME:PAD S PRO WIRELESS™ SB911194
PAIRING WITH CONSOLE
1. Enter System Settings on the Home Screen of the Console
2. Select Change Grip/Order under Controllers and Sensors
3. Controller must be powered off. Press and hold Home on GAME:PAD S PRO WIRELESS™ for approximately 5 seconds, until the red LED's
starts flashing fast
4. Wait for the Gamepad-Icon to show up under the connected controllers (this may take up to 10 seconds). The red LED will be illuminated
to indicate that connection has been established
5. Press A to finish pairing procedure
6. To use vibration control combination buttons, you should turn on the vibration setting in the console, then simultaneously press "L3" &
"-" to turn on or turn off the vibration function
LOADING GAME:PAD S PRO WIRELESS™
· The controller comes with TYPE-C charging cable. To charge the controller, connect the TYPE-C connector to the controller, and the
USB connector to the console
• The battery is not replaceable
RECONNECTING PAIRED GAME:PAD S PRO WIRELESS™
• Press Home on GAME:PAD S PRO WIRELESS™ at anytime, when the Console is switched on
• An illuminated LED indicates that the connection has been established
IMPORTANT
Please note that, while the Console can be put to Sleep Mode using GAME:PAD S PRO WIRELESS™, it cannot be woken up with it and
needs to be switched on manually using its POWER-Button.
TECHNICAL SPECIFICATIONS
• Model number: SB911194 • Frequency: Bluetooth
• Input Power: 5VDC / 330mA • Output Power: 3.7VDC / 20mA
• Battery capacity: 500mAh • Battery type: 3.7V/Polymer Li-ion
• Working Range: 8-10m
TURBO FEATURE
1. Press & hold any button you want to program it as turbo feature (A、B、X、Y、L、ZL、R、ZR)
2. Press Turbo button to active turbo feature for the button you hold at step 1
3. Press & hold the programmed button then press turbo button again to cancel the turbo feature
INFORMATION
If you experience functional issues using GAME:PAD S PRO WIRELESS™, please download the latest firmware installer from
www.snakebyte.com, then run the installer program and follow the on screen instructions.
SAFETY PRECAUTIONS
• Do not expose the product to extremely hot, or cold temperatures, high humidity or direct sunlight
• Do not use the product close to any heat sources
• Do not subject the product to any liquids and never use it when the product is wet
• Do not put heavy objects on the product
• Do not throw or drop the product
• Do not attempt to take apart, open, service or modify the product. Doing so could present the risk of electronic shock, damage, fire, or
other hazard
• Clean only with a soft, dry cloth. Avoid cleaning solutions, solvents or other chemicals and do not attempt to clean connectors as this
may damage the product
HEALTH PRECAUTIONS
• If you feel tired, experience any discomfort or pain in your arms, or hands, stop using the product immediately and consult a doctor, if
the conditions persist
• Avoid prolonged use of this product and take a break about every 30 minutes
COPYRIGHT INFORMATION ©2020 All rights reserved. This document may not in whole or in part be reproduced, stored in a retrieval system,
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, or reduced to any electronic medium or
machine-readable form without prior consent, in writing, from snakebyte distribution GmbH. snakebyte is a registered trademark of snakebyte
distribution GmbH. Nintendo is a registered trademark of Nintendo Inc.. Nintendo Switch™ and Joy-Con™ are registered trademarks of Nintendo
Inc.. This product is not designed, manufactured, approved, sponsored, or endorsed by Nintendo. snakebyte is a registered trademark of
snakebyte distribution GmbH. All trademarks are the properties of their respective owners.
General safety instructions
Please familiarise yourself with all safety
instructions and instructions for use before
using the product! Include the documentation
when passing this product on to third parties!
Publicidad
