Xiaomi Instant Photo Printer 1S Manual De Usuario página 6

1
Turning On
Plug the power cord into the power port, and press the power bu on.
When the power indicator is on and the Wi-Fi indicator blinks orange,
the printer is turned on and the Wi-Fi is waiting to be connected.
2
Connecting with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app*. Control your
device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app is installed already.
Or search "Mi Home/Xiaomi Home" in the app store to download and
install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
A ention: The Mi Home/Xiaomi Home app is the only way to configure the
network se ings for the printer. Make sure the network connection is configured
before using PC for wireless printing. The latest version of the app is suggested for
a successful connection to the printer. The Dual-band steering function needs to
be disabled for the router. When the printer is not connected to the network or the
network connection is disconnected, it will automatically turn off a er ten
minutes. Please restart it and carry out corresponding operations.
Notes:
If you fail to scan the printer's QR code, search for its name to add it.
●
The version of the app might have been updated, please follow the instructions
●
based on the current app version.
*
The app is referred to as Xiaomi Home app in Europe (except for Russia).
The name of the app displayed on your device should be taken as the default.
5