Publicidad
Idiomas disponibles
Idiomas disponibles
While using this device, several basic safety
precautions must always be followed in order to
reduce the risk of fire, electric shocks and personal injuries.
Read and understand the manual before start using
this equipment. Save this manual for future
reference.
These preventive measures are essential for your safety.
Always use this equipment with care in a responsible
manner having in consideration that its user is responsible
for eventual accidents caused to third parties or their
goods.
Make sure that all individuals using this equipment have
had the necessary training and have read and fully
understand this instruction manual. Before operating it for
the first time, its user must be instructed by the dealer or a
competent person about its functionalities.
This instruction manual is an integral part of the equipment
and must always be provided.
Never allow this equipment to be used by children, people
with limited physical, sensorial or mental capabilities, with
lack of experience and knowledge and who is not familiar
with the instructions.
This device must only be operated as described in
this instruction manual. No other use is allowed
besides the described.
For safety reasons, any changes other than the assembly of
accessories authorized by the manufacturer are prohibited.
Any changes made void the warranty.
Do not use the charger in an explosive environment,
especially in the presence of flammable liquids, gases or
dusts. Any power tool may form sparks that might ignite
liquids, gases, or dust.
The supply voltage must match the equipment's
technical specifications. Keep voltage between ± 5%
of nominal value. Do not use the equipment where the
power supply isn't stable. The power cable must be plugged
into an electrical socket with a differential protection and
earth connection.
If the working area is extremely hot, damp or with high dust
concentration, the power socket circuit must be protected
with a circuit breaker (30mA), to ensure the user's safety.
Do not expose the charger to rain or use them in wet or
damp environments. The presence of water in an electric
tool increases the risk of damage and electric shock to the
user.
Never use the power cable to pull, carry or unplug the tool.
Damaged power cables increase the risk of electric shock.
Keep the power cable and plug away from heat
sources, oil, sharp objects and the rotating accessory.
If the power cable is damaged, it must be replaced by a
qualified technician; it is not allowed to repair it.
Do not modify the power cable plug. Use a compatible
socket with the plug of this equipment. Do not use any type
of adapter.
The use of extension cords to connect the power cable is
not recommended. However, if you use an extension cord,
you should take some precautions, such as:
▪ If using this device outdoors, use only suitable extension
cords for outdoor use. Using a proper extension cord
reduces the risk of electric shock;
▪ Only use extension cords, plugs and sockets with earth
connection;
▪ The extension cable section must be proportional to the
length and have equal or higher characteristics to the
charger power cable;
▪ Do not use damaged extension cords;
▪ Check them before using and replace if necessary;
▪ Always unplug the extension cord before removing the
charger power cable;
▪ When it's an extension cord reel, unroll the entire cable.
Make sure that the charger is only used by who is familiar
with the instruction manual.
Always check the charger before using it. If the charger
does show damages do not plug it in the socket. This may
cause an electric shock to the user.
If the terminals are dirty, clean them with a dry and clean
cloth.
Publicidad
