KNOW YOUR TRIMMER
READ THIS OPERATOR'S
MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR
UNIT.Compare the illustrationswith your unitto familiarize yourselfwith the loca-
tion of the variouscontrols and adjustments. Save this manual for future refer-
ence,
Assist Handle
Motor
Recessed
Housing
Plug
/
Air Vents
Cord Retainer
Edge
Guide
Debds Shield
RECESSED PLUG
The recessed plug is where you attach
your extensioncord to the unit.
TRIGGER
SWITCH
The trigger switch is used to tum on
the unit. Squeeze the trigger switchto
operate the unit.
LINE LIMITER
The line limitercuts the cutting line to
the proper cutting length.
_t Semi-automatic
Head with .065" line.
Line Limitsr
ASSIST HANDLE
The assist handle is used to help hold
and guide the unit.
SEMI-AUTOMATIC HEAD
The semi-automatic head holdsthe
cutting line and rotates duringopera-
tion.
EDGE GUIDE
The edge guide protects the unit from
contacting the ground during edging.
OPERATING
INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord
Gauge
25 Ft.
18 Gauge
50 Ft.
16 Gauge
1O0 Ft.
16 Gauge
Extension cords are available for this
unit.
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the
handle and around the hook. Insure
the plug and cord are firmly and fully
engaged.
6