Publicidad
Idiomas disponibles
Idiomas disponibles
1.0 Put the device into operation:
USB
Start...
1.1 Connect power supply:
Please note the safety instructions on
Connect the device to the USB power supply unit using
the supplied USB cable. As soon as you plug the power
supply into a socket, the device switches on.
1.2 Use other power sources:
The device can also be operated with another 5V USB
power supply, such as a power bank, or via the USB port
on the computer.
Make absolutely sure that the power source supplies a
voltage of 5 volts and a current of at least 0.5 amperes!
When connected to a computer, [USB] appears
on the display to indicate that there is a data connection
to the device (see ...). To use the device, briefly press the
button once to display the menu.
1.3 Turn on:
As soon as the device is supplied with power, it switches
on and begins initializing the system and an internal self-
test. [Start ...] appears on the display and the 3 basic
colors red, green and blue of the emitter light up briefly
one after the other. The main menu or the last used
application then appears on the display. Your device is
now ready for use.
If no application is active and the button has not been
pressed in the last 10 minutes, the device switches off
automatically to save energy.
You can switch the device on again by briefly pressing
the button.
When connected to a computer via USB, the device is
always switched on.
21
page
19!
Publicidad
