appliance unattended while it is working.
- Always place the slices of bread or food inside the
special pliers and be careful not to include foods that are
too large in relation with the capacity of cooking slots.
- Always use the toaster with crumb tray inserted, making
sure it is assembled correctly.
- Do not use to cook food containing jam, chocolate
spread, or foods that might drip in general.
- Once finished, unplug it and wait for the cooling of each
part of the unit before storing.
- Do not immerse the product in water or other liquids. In
any case prevent splashes of water or other liquids from
reaching the toaster.
1 On-off lever
4 Body
7 Defrost button
OPERATING
This bread toaster is suitable for cooking and heating tasty toast and toasted bread. Thanks to the defrost
function, activated by the button (7) "Defrost", it is also possible to defrost bread or toast.
Cooking
- Make sure that the lever (7) is in the high position.
- Place the product on a flat and stable surface and connect the plug to the power outlet.
- Set the timer (8) depending on the taste, the thickness of the bread and the roast that you want to achieve.
- Place food in the special pliers (9) and put the clamps in the slots (2).
- Lower the lever (1) to start cooking. During cooking, check that food does not burn. If you want to stop
cooking, at any time you can press the OFF/Cancel button (6).
- After cooking, the lever (1) lifts automatically to power off the equipment. To take them out, grab the
pliers from the special handles without touching the toaster, especially the top.
-
Unplug the unit and wait for the complete cooling of each part, before storing the appliance.
Defrost -
This function allows you to heat the cooking slots at a temperature suitable for defrosting bread.
To use this option, after you have set the timer (8) and turn down the lever (1), press defrost button (7).
Heating -
This function allows you to heat the coking slots enough to maintain the temperature of the bread,
or heating some cold food. To use this option, after you have set the timer (8) and turn down the lever (1),
press the heat button (6).
CLEANING
Unplug the unit from the electrical outlet and let it cool down before starting cleaning operations.
-
Do not immerse the unit in water. In any case, avoid any splashing of water or other liquids, and pay
attention the water does not enter the slots for pliers.
-
The pliers can be treated like normal dishes. Clean the crumb tray by removing first all the crumbs and
then wipe off the residue with a sponge, making sure to dry completely before replacing it in the toaster.
-
Clean the body of the toaster with a damp cloth.
DESCRIPTION G10134
2 Cooking slots
5 Safety switch-off button/Cancel
8 Timer
3 Removable crumb tray
6 Keep-warm button/Reheat
9 Stainless steel plyers
10