Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Step 5
Remove the 3 preassembled M5 nuts from the upper
K
support (K)� Slide the 3 upper supports into the slots at
the top of the burner (E)� Once fully inserted, secure the
upper supporters into the burner by reattaching the M5
nuts that were removed at the beginning of this step�
E
Note: The hooks on the upper supports (K) should be
facing up, as pictured.
Step 6
Remove the 3 preassembled screws from the top of
the burner (E)� Attach the glass tube ring (D) to the top
of the burner (E) using the 3 screws removed at the
beginning of this step� Tighten securely with a Phillips
screwdriver�
D
E
Step 7
Attach the upper radiation screen (B) to the lower
radiation screen (C) using 3 M8x75 studs (II) and 3 M8
B
nuts (JJ)�
JJ
II
C
11
Publicidad
