Erbauer V10622 Manual De Instrucciones página 50

Change the starting point of measure
1
Press the button
1. The system default measurements start at the bottom as a reference
point.
2. Press button to change the reference to the middle.
3. Press button to change the reference to the top
Function switch
1
1. Press the button
2. Press the
button to move the function anticlockwise.
3. Confirm the required function by pressing the measuring button
4. To exit the function menu, press the
340337982_MNL_IN_V01.indb 49 340337982_MNL_IN_V01.indb 49
2
to select the required measuring position.
2
to access the function menu.
to move the function clockwise, press the
3
3
button.
49
4
or
.
08-06-2022 17:25 08-06-2022 17:25