Erbauer V10622 Manual De Instrucciones página 51

Single distance measuring
1
NOTE:
• Target surfaces: Measuring errors can occur when measuring to
colourless liquids, glass, foam or semi-permeable surfaces or when
aiming at high gloss surfaces. Against dark surfaces the measuring
time increases.
• Every time the device is turned on it will default to the single
measurement function.
Minimum - maximum measuring
1
3 Sec
1. Press and hold the measuring button
2. Aim the laser at the target. Note in continuous measuring mode the
laser continually beeps when sound is on.
3. The screen displays the 'Min' and 'Max' measurements recorded.
4. Press the measuring button again
340337982_MNL_IN_V01.indb 50 340337982_MNL_IN_V01.indb 50
2
2
min max
3
3
.
to stop measuring.
50
4
9.999M
4
max 9.99M
min 8.99M
08-06-2022 17:25 08-06-2022 17:25