Publicidad
Idiomas disponibles
Idiomas disponibles
1
110 V
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
2
1
> Prior to mounting, remove
the mirror front(s) of the
cabinet by unlatching each
hinge.
> Also remove side panels.
9
4x
> Attach side fronts with
four supplied screws.
2
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Plug the unit into outlet
and lift the unit up
and onto the mounting
brackets.
10
16x
> Add eight supplied shelf
brackets.
3
4x S8
> The plastic anchors
provided are for concrete
wall applications.
7
> Check the cabinet is
leveled and securely
attached to the wall.
11
> Add the shelving to the
unit.
4
4x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
8
> Check the screws which
allow adjustment of the
unit. The top screw will
adjust front to back. The
bottom screw will adjust
up and down.
> Make adjustments to the
level as needed.
12
1
2
> Re-attach the mirror
fronts.
MAL_Delos_DL7544/17.09.1
6
Publicidad
