Indoor Insect Killer Use instructions
INSTRUCTION FOR USE
If the cord supply is damaged, do not use the appliance and contact directly the manufacturer or to
the authorized assistance centre to replace it.
Do not leave the appliance plugged if not necessary. Unplug the appliance if not used or when you
leave your house.
Keep away to a reasonable distance the fan from walls, doors, windows or every object that could
avoid the appliance to work in the correct way.
Do not place the appliance near to a heat source.
Place the appliance on a stable surface.
Do not place the appliance on flammable surfaces or where could be present gases, steam or ex-
plosive smoke.
Do not use the appliance near opened windows in case of bad weather conditions.
Always unplug the supply cord when you clean or move the appliance.
Do not pull the supply cord to unplug the appliance.
Do not introduce objects, fingers or other into the protection grid.
Do not manipulate the appliance with naked feet.
Do not touch the appliance with wet hands.
If the appliance is wet, do not use until it is completely dry.
Do not expose the appliance to rain, sun, etc...
Do not fold the metallic grid.
Keep away from children. Do not place the appliance near children.
Do not place the appliance into barns, stables, garages or similar.
This appliance is only for internal use, that do not intend into barns, stables, garages or similar.
DESCRIPTION
1 – Fixing chain
2 – External grid
3 – Lighting tubes
4 – Electric metallic grid
5 – Blade
6 – Slide base plate
7 – Button ON/OFF
INSTRUCTION FOR USE
Place the appliance following carefully the instructions mentioned above.
Plug the supply cord in the supply power.
The appliance will automatically switch on.
The appliance light and the insects will be naturally attracted by the UV light, they will fly to the elec-
tric metallic grid (4) and will be fulminated instantaneously. The insects will fall into the slide base
plate (6).
The appliance's light is completely safe for humans being.
8