Publicidad
Idiomas disponibles
Idiomas disponibles
REMARKS:
1.
The first 24 hours after installation, it is normal to notice a slight noise during fan operation. After this
adjustment period, the rumor will disappear.
2. The light of the fan turned off through the remote control remains in stand-by mode. It will be completely off if
power is cut off through the wall switch.
3. If you are installing the fan in a false ceiling made of plaster, Wood or metal, the noise of the fan may be
amplified due to the existing air chamber. We recommend adding an insulating material in the ceiling chamber
to mitigate the transmission of sound.
4. Non-interchangeable blades between different fans, blade sets are balanced with exact weights.
REMOTE CONTROL USERS GUIDE
Notices
1. Each remote control is originally synchronized with its own fan. Another remote control will not
make the fan work. Do not swap them.
2. To link the remote control with the fan light, immediately after turning the fan on, press and hold
the 1
button for a few seconds until a beep sounds.
Make sure all other fans are turned off from the wall switch, to avoid being synchronised.
Fan OFF
Nature wind. (Changing speed/Fan ON:
Turn on in the last F/R function.)
Fan ON. Turn on at the desired speed
Foward / Reverse
Ligth ON 3000K
Ligth ON 4500K
Ligth ON 6000K
Reduce light intensity
Increase light intensity
Ligth ON-OFF previous memory
Fan timer
2 1,5V AAA battery
15
Publicidad
