Publicidad
3.
4.
5.
6.
Relays can be connected to a variety of devices.
2 / 28
7.
Put a jumper across TERM on the first and last device on
a cable run to ensure correct RS-485 termination and avoid
communication issues with signal reflection, etc.
8.
9.
Configuring the Relays
Relay Modes
The receiver features Single Pole Double Throw (SPDT) Form
C relays that can be configured in 3 different modes to support
different applications.
1..2..3...
P/N 466-2717 • REV A • ISS 23MAY16
Publicidad
