Publicidad
Idiomas disponibles
Idiomas disponibles
Box content:
Wi-Fi connector x 1
Thermostatic valves x 2
Contenido de la caja
Installation
1. Conector
Note: This device works on a 2.4GHz frequency (it does
not support 5g), during the connection process the
mobile phone used for the link must be connected to
the 2.4GHz network. For more information, contact
your internet service provider.
- Install the App "Energeeks 3.0" on your mobile
phone, register you in the App and enter to install the
connector.
- Plug the connector into the electrical current, wait
a few seconds to start, press the "options" button for
three seconds, until you hear a beep, the blue LED that
blinked slowly now blinks quickly.
- In the App press the + button to add a new device
manually and select "connector".
- Confirm that the connector is in connection mode,
enter your Wi-Fi password (2.4g) and press confirm.
If the connection fails, reboot the router, check that
the mobile phone is connected to a 2.4g network and
try again.
46
Publicidad
