Publicidad
Idiomas disponibles
Idiomas disponibles
used universally and without accessories for valves
from most manufacturers with a thread size of M30 x
1.5 mm.
The supplied adapter is required for installation on Danfoss
RA valves.
4. Once the valve is installed, press the «confirm» key
to start testing the valve, this operation may take a
few minutes, the valve will slowly close the radiator to
establish the open and closed points.
If the installation is correct, the main screen will be displayed,
otherwise, if the test has not been completed successfully,
one of the following errors will return.
F1. - The valve has been too slow; check that it is
correctly installed, check that it is not stuck.
F2. - The operation range is too wide; verify that
the valve is fully adjusted and the thread is well
tightened.
F3. - The actuation range is too small; verify that
48
Publicidad
