Publicidad
Idiomas disponibles
Idiomas disponibles
2. Functions
Headlight
Brake
Folding
mechanism
Wheel motor
Charging port
Indicators
The control panel has 4 LEDs, indicating the level of charge.
During the consumption of the battery, the status indicators light
up, then flash and at the end they turn off for each other. If the 4
LEDs are on, the battery level is 100% -86%; if 3 LEDs are on, and
one is flashing, the charge level is -85% -71%; then all the charge
level lights start flashing, and then it does not turn on.
The lowest charge level indicator can be white or green. When the
vehicle is in normal operation, the LED lights up white; if the scooter
operates in energy saving mode, indicator lit in green. (In energy
saving mode: the maximum speed is 28 km / h, the speed level is
adjusted more smoothly, this is more suitable for beginners).
Speed Lever
Control Panel
Signal
Clamp
Brake Lights
Brake disc
Stand
Battery compartment
3
3. Assembly
1) 1) Fix the steering bar and open the
parking bridge
Use the hexagonal wrench of the
packing box to tighten the screws on
the handlebar
Power button
Press the power button to start the vehicle. Press and hold the button for 2
seconds to turn on the device. When it is on: press the power button to turn
on / off a flashlight; Press the power button twice to normal mode and power
saving mode.
2) Place the vertical bars of the handlebar
4. Test the ignition switch after completing the
assembly
4
Publicidad
