KlipXtreme Harmonium Manual Del Usuario página 5

Buttons
Press this button briefly to turn the soundbar on or off.
1. Power button
Press this button to connect or disconnect the paired
2. Pair button
Bluetooth
Press this button to switch modes through Bluetooth
3. Mode button
HDMI (Arc), USB, Aux, and optical.
Press the Vol + button to increase the volume coming from
4. Vol. +
the soundbar.
Press this button to select the previous track on your
5. Previous track
playlist. Available in BT and USB modes.
Press this button to play or pause the audio coming from
6. Play/pause
the soundbar. Available in BT and USB modes.
Press this button to select the next track on your playlist.
7. Next track
Available in BT and USB modes
Press the Vol - button to lower the volume coming from
8. Vol. -
the soundbar.
9. Treb. - Press this button to decrease (high) frequencies of the
soundbar. Available in all modes.
Press this button to select the equalizer profile of your
10. EQ button
choice (EQ0, EQ1, EQ2). Available in all modes.
EQ0: News and dialogue mode
EQ1: Music mode
EQ2: Movie mode
Press this button to increase (high) frequencies of the
11. Treb. +
soundbar. Available in all modes.
Description
device.
®
Buttons
12. Bass -
13. Bass +
,
®
14. Mute
IV. Preliminary steps
1. The soundbar can be placed on a desktop or hanged on the wall.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface. The drilled holes must be placed about 21
inches apart from each other.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
4. Drill pilot holes and insert anchors if installing the unit on a concrete or brick
wall.
Description
Press this button to decrease (low) frequencies of the
soundbar. Available in all modes.
Press this button to increase (low) frequencies of the
soundbar. Available in all modes.
Mutes the audio coming from the soundbar. Press it again
to unmute the soundbar.
21in