Publicidad
Idiomas disponibles
Idiomas disponibles
The controls look like this:
Controls
Operating
Instructions
POWER
Operation starts when this button is pressed and
stops when you press the button again.
FAN SPEED SELECTOR
For increased power while cooling, select a higher
fan speed.
3 steps: High mLow--
Med
ON/OFF TIMER
The timer can be set to start and stop the unit in
hourly increments (up to 12 hours).
You will usually use shut-off time while you sleep.
For your sleeping comfort, once Time is set, the Temperature setting will
raise 2°F after 30 min, and once again after another 30 min.
OPERATION MODE SELECTOR
Select cooling mode to cool the room.
Select energy saver mode for energy saving
operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
TEMPERATURE CONTROL
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60°F-86°F
(16°C-30_C).
The unit takes an average of 30 minutes to adjust the
room temperature by l°R
REMOTE CONTROL SENSOR
_
the unit runsas previoussettingoperation.
Owner's Manual
17
Publicidad
