Publicidad
Idiomas disponibles
Idiomas disponibles
To Change Daylight Saving Time Back
Use the following steps to set the day (at 2:00 AM) that the Simplex 125 sets the time back to normal.
A. Remove the cover and press the CHANGE button once (refer to page 8 for parts location).
B. Press ACCEPT until the programming arrow appears next to BACK.
C. Press CHANGE once.
• The currently set WEEK NUMBER begins to flash.
Press CHANGE until the desired week of the month (1st, 2nd, 3rd, 4th, or Last) displays.
Press ACCEPT to set the week shown.
• The currently set MONTH begins to flash.
Press CHANGE until the desired month is shown.
Press ACCEPT to set the month shown.
• The currently set DAY OF THE WEEK begins to flash.
Press CHANGE until the desired day of the week is shown.
D. Press ACCEPT to set the DST BACK options shown on the display.
• The programming arrow moves to the Language and Font Size option. To modify that
option, proceed to step C of the next section. To exit programming at this point, hold
ACCEPT down while the programming arrow cycles through all the options.
Note:
To turn off the Daylight Savings Time option, reprogram to display all dashes.
PROGRAMMING
19
Publicidad
